When a drain in your house gets clogged, the problem is typically easy to diagnose and fix; but, what about when all the drains in your house are moving really slowly? When every drain in a house is moving slowly, the problem is more serious than just one clogged drain. This issue could be caused by a number of issues, but a common reason all drains in a home move slowly is the result of bad water in a home. If this is the cause of your slow-moving drains, it is also very likely that you will have low water pressure in your home too. Read this article to understand more about this problem and what to do about it.
How Bad Water Leads To This Issue
Water that contains a lot of minerals, such as iron, lime, and calcium, can be considered bad water. While all water contains some minerals, when the levels are high, the water can damage the pipes each time the pipes are used.
This happens because a small amount of the minerals in the water ends up trapped inside the pipes. As this occurs repeatedly, the minerals begin attaching to the pipes. The result of this is narrowed pipes. When pipes narrow, water cannot move through them as easily. This will cause your water pressure to drop in your home, and it can also be a leading cause of slow-moving drains.
How A Plumber Can Diagnose The Issue
When you begin experiencing problems with slow-moving drains and problems with your water pressure, you should hire a plumber to come to your home. A plumber will check several things during this visit, and this may include examining your septic tank. A full septic tank will not cause your water pressure to decrease, but it can cause the drains in a home to move slowly.
If the plumber believes it is a problem with your pipes, the plumber may use several different methods to determine if this is the cause of the problem. One method might simply be through examining certain pipes in your home. The plumber may remove a few pipes found under your sinks to see how they look.
If this is not enough to diagnose the problem, the plumber may use a camera device to see inside the pipes. This is the same type of device plumbers use to find sewer pipe problems. The plumber pushes the camera into a pipe in your home, and he or she will get a clear image of how your pipes look. This is the best way to determine if the pipes have minerals and debris built up in them.
How The Problem Can Be Fixed
If the plumber finds that your pipes are clogged with mineral deposits, there are several ways to fix the problem. The first method involves pouring drain cleaner into the pipes to try to eat away at the built-up debris. This method is typically not very helpful, though, but it can be worth a try.
A second method involves the use of an auger, which is a machine that can be inserted into pipes to clean them. When a plumber does this, the powered auger will eat away at the minerals, and this may clean them out enough to solve the problem.
If the pipes are really old and really clogged, replacing them might be the best route. This will be the most expensive method to use, but it will solve the problem completely. After choosing any of these options, you may also want to consider installing a water treatment device to clean your water before you use it. This will reduce the amount of minerals in your water, and this could help save your pipes.
If you would like to learn more about ways to fix slow-moving drains, contact a plumber from a company like Aurora Plumbing and Electric Supply, Inc.